PE Adhesive Tape coating for M S Pipe
Description
PE Adhesive Tape coating for M S Pipe is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering.
The PE adhesive tape coating shall be applied after the inner-layer tape by hand or with a wrapping machine.
Structure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
Features:
Excellent adhesion to inner-layer tape and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
Technical datas:
PE Adhesive Tape coating for M S Pipe : XUNDA-T200 Series
|
Type
|
T 250
|
T 265
|
T 280
|
|
Total thickness
|
0.51 mm
|
0.65 mm
|
0.80 mm
|
|
Film
|
0.38 mm
|
0.51 mm
|
0.63 mm
|
|
Adhesive
|
0.13 mm
|
0.14 mm
|
0.17 mm
|
