oil pipe joint wrapping tape & Accessory Products
Xunda carries a full line of products to complement the main line coating systems and meet the challenges of modern pipeline activities.
Utility work: hand-applied tape products for gas utility, oil field, and plumbing applications on small diameter pipe.
Coating repair: cold-applied tape products for plant and field repair of main line coating systems.
Specialty fittings and fabrication work: a variety of tape systems and mastics that conform to irregularly-shaped pipe.
Field joints: single-sided and double-sided tape systems that conform to bell and spigot, welded and mechanically-coupled field joints.
930-35)
|
Heavy duty joint wrap tape for hand wrapping in applications where higher shear properties are required. Designed without release liner for less waste and ease of use.
|
0.89 mm
35 mil
|
25 N/10 mm
225 oz/in
|
66°C
150°F
|
932(-35)
|
Cold-applied tape system with an elevated high-tack adhesive. Provides excellent conformability when hand applied to field joints, fittings and specialty piping. EN/DIN B30 Qualified.
|
0.89 mm
35 mil
|
28 N/10 mm
250 oz/in
|
66°C
150°F
|
932(-50)
|
1.27 mm
50 mil
|
28 N/10 mm
250 oz/in
|
66°C
150°F
|
934(-35)
|
Cold-applied tape system with a high tack adhesive. Used as a patch/repair system and as the primary corrosion protection system on field joints, fittings and specialty piping.
|
0.89 mm
35 mil
|
28 N/10 mm
250 oz/in
|
66°C
150°F
|
934(-50)
|
1.27 mm
50 mil
|
35 N/10 mm
320 oz/in
|
66°C
150°F
|
939
|
100% solids mastic designed as a self-adhering filler material prior to overcoating with Polyken joint coating tape systems.
|
3.17 mm
125 mil
|
33 N/10 mm
300 oz/in
|
93°C
200°F
|