Wrap pipe outer tape
System description:
The XUNDA-T200 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering.
The wrap pipe outer tapeshall be applied after the inner-layer tape by hand or with a wrapping machine
Structure:
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Film backingr: Special blend of stabilized polyethylene
Features:
Excellent adhesion to inner-layer tape and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
Physical Properties
wrap pipe outer TAPE: XUNDA-T200 Series
Item
|
T 250
|
T 265
|
T 280
|
Total thickness
|
0.51 mm
|
0.65 mm
|
0.80 mm
|
Film
|
0.38 mm
|
0.51 mm
|
0.63 mm
|
Adhesive
|
0.13 mm
|
0.14 mm
|
0.17 mm
|
Elongation at Break
|
400%
|
Tensile Strength
|
58 N/cm
|
63 N/cm
|
65 N/cm
|
Yield Strength
|
35.9 N/cm
|
43.4 N/cm
|
45.8 N/cm
|
Dielectric Breakdown
|
32.9 KV/mm
|
43.5 KV/mm
|
45.2 KV/mm
|
Cathodic Disbandment
|
0.24 in radius 6.4 mm
|
Volume Resistivity
|
2.5 x 1012 ohm.m
|
Water Vapor Transmission Rate
|
0.1 gm/M2/24h
|
Water Absorption Rate
|
< 0.10%
|
Recommended Application Temperature
|
-50 to +600 C
|
Color
|
White
|
Available Roll Size (width x length)
|
2" to 32" X 50 to 800’
|